Browse by Call Number


AIT Thesis no.ST-21-14
Seismic response of asymmetric rectangular blocks in high-rise buildings
by Sivapalan, Sivaram
AIT Thesis no.ST-21-15
The development of a framework for damage-index decoupling matrix determination from the actual structure
by Napat Kumya
AIT Thesis no.ST-21-16
An experimental study of the extruded mortar using 3D printing technique
by Hussain, Raisa Tamsin
AIT Thesis no.ST-21-17
Development of rapid setting and self levelling repair mortar
by Sultana, Jennifar
AIT Thesis no.ST-21-18
Suppression of wind-induced responses of structures by using plasma actuators
by Thanathip Klinfueang
AIT Thesis no.ST-21-19
In-plane behavior of reinforced masonry walls subjected to lateral forces : an experimental approach
by Thittiya Ruangsak
AIT Thesis no.ST-21-20
Quantitative assessment of dissipated energy from structural components under seismic ground motions for a low-rise RC framed building
by Neupane, Basanta
AIT Thesis no.ST-22-01
Suppression of wind-induced response of tall buildings by using a tuned mass damper made of multi-stage steel-laminated rubber bearings
by Chanon Chotmanee
AIT Thesis no.ST-22-02
Development of sprayed mortar for fabric formwork
by Sis Lwin Phone
AIT Thesis no.ST-22-03
The structural frame member health evaluation of a scaled frame structure by normalized modal strain approach
by Titiwas Jantagoonroj
AIT Thesis no.ST-22-04
Effect of performance-based wind design on seismic performance of a tall building in high wind and moderate seismic zone
by Ahmed, Wamiq
AIT Thesis no.ST-22-05
Evaluation of the soft-storey performance of 2d reinforced concrete frame using natural frequency
by Shrestha, Sneha
AIT Thesis no.ST-22-06
Estimation of seismic structural responses through accelerometer measurement : an experimental and numerical study
by Fathisepahvand, Mojtaba
AIT Thesis no.ST-22-07
The effect of performance-based wind design on seismic design of a tall building in high seismic and high wind zone
by Subedi, Akansha
AIT Thesis no.ST-22-08
Numerical study of blast loads on buildings to understand the lethality of non-structural elements
by Tanyaporn Chouydamrong
AIT Thesis no.ST-22-09
Experiments on a compression-free brace with a single cam grip under lateral reversed-cyclic loads
by Siripong Kongseng
AIT Thesis no.ST-22-10
Experiments on tension force carrying capacity of grouted rebar splice in steel square pipe confinement
by Khumpai, Dapaka
AIT Thesis no.ST-22-11
Determination of flexurally-deformed profiles of the slender structures using array moiré camera technique
by Supakit Pakdee
AIT Thesis no.ST-22-12
Framework development for the simplification of nonlinear beam column joint model using layer shell element
by Kittisak Boonsriarporn
AIT Thesis no.ST-23-01
In-plane behavior of reinforced masonry walls subjected to lateral forces : an analytical approach
by Klewvarin Sonthisuwan