AIT Thesis no.ST-20-22
The experiments on precast beams-column sub-assemblages using u-shell and grouted tube rebar splices
by Thanathip Wongsorod
|
AIT Thesis no.ST-20-23
Measurement of wind-induced dynamic stresses in large billboard structure
by Naditorn Pirisomboon
|
AIT Thesis no.ST-20-24
Evaluation of mega column, tubular system and core wall system for tall buildings in low to moderate seismic region
by San Thaw Tar Myint
|
AIT Thesis no.ST-20-25
Active control of wind induced responses using plasma actuators
by Shrestha, Saugat
|
AIT Thesis no.ST-20-26
Experiments on tension force carrying capacity of grouted rebar splice in steel pipe confinement
by Su Yee Lei
|
AIT Thesis no.ST-20-27
Development of high-strength lightweight concrete with expanded clay aggregate
by Peerawat Parnporamat
|
AIT Thesis no.ST-20-28
Experimental study on the beam-column connection for precast concrete frames using confined-splice system under reversed cyclic loadings
by Onprapha Uppakaew
|
AIT Thesis no.ST-20-29
Development of displacement measurement equipment using sampling moiré technique in single board computers
by Srikulnath Nilnoree
|
AIT Thesis no.ST-21-02
Rapid identification of seismic damage in tall buildings by using acceleration response time histories : effects of modelling errors & correction measures
by Liyanarachchi, Navindra
|
AIT Thesis no.ST-21-03
An experimental study of the mechanical properties and durability of basalt fiber reinforced preplaced aggregate concrete
by Amin, Mehmud Murshed Ul Al
|
AIT Thesis no.ST-21-04
A comparative study of the flexural behavior of preplaced lightweight aggregate concrete and normal weight reinforced concrete slabs
by Islam, Md Shahidul
|
AIT Thesis no.ST-21-05
Large-field displacement measurement system using sampling moiré camera
by Nutchapat Theetawatwong
|
AIT Thesis no.ST-21-06
Assessment of local ductility response reduction factors of 42-story and 30-story reinforced concrete dual system buildings
by Cuevas, Dustin Glenn
|
AIT Thesis no.ST-21-07
Determination of dynamic horizontal stiffness parameters of a pile foundation using acceleration and dynamic strain measurements
by Sawumma, Sadriar Alam
|
AIT Thesis no.ST-21-08
Mix design and characteristics evaluation of high-performance concrete incorporating silica fume and fly ash using modified andreason & andersen particle packing model
by Karna, Binay
|
AIT Thesis no.ST-21-09
Using data analytics approach to estimate the efficiency of the structural design of tall buildings
by Sapkota, Binod
|
AIT Thesis no.ST-21-10
Quantitative assessment of dissipated energy from the structural component under seismic ground motions for mid rise building
by Poudel, Jhabindra
|
AIT Thesis no.ST-21-11
Development of rapid setting and self-compacting repair concrete
by Lu Min Thant
|
AIT Thesis no.ST-21-12
An experimental study on structural damage identification using measured acceleration data
by Regmi, Abhishek
|
AIT Thesis no.ST-21-13
A displacement-based design Procedure for low to mid-rise buildings with masonry infills in the Philippines
by Tuala, John Lorenz Sibugan
|