AIT Thesis no.ST-17-27
Aerodynamic interferance effects of two interfering buildings on the characteristics of wind force on a tall building
by Kittikarn Maneekad
|
AIT Thesis no.ST-17-29
Performance-based evaluation of nonstructural components in tall buildings
by Nwe Ni Sein Toe
|
AIT Thesis no.ST-17-30
The effects of aerodynamic interference on dynamic wind pressure and dynamic response of tall buildings
by Anurak Pitirattanaworranat
|
AIT Thesis no.ST-18-01
Theoretical approach to damage identification of a scaled reinforced concrete frame building by frequency factored damage index (FFDI)
by Bhatta, Jitendra
|
AIT Thesis no.ST-18-02
The finite element model for construction of a seismic attenuation model in Thailand
by Shameer, Mohamed Naheem Muhammed
|
AIT Thesis no.ST-18-03
Development of a tuned mass damper using multi-stage steel laminated rubber bearings
by Phruek Chansukho
|
AIT Thesis no.ST-18-04
Seismic retrofit of a typical low to mid-rise infilled RC frame residential buildings in Kabul, City, Afghanistan by using Fiber Reinforced Polymer (FRP) and Textile Reinforced Motar (TRM)
by Eltaf, Mohammad Ali
|
AIT Thesis no.ST-18-05
Assessment of nonlinear seismic demand of high-rise RC shear wall buildings by modal approach
by Vasanthapragash, Nadarajah
|
AIT Thesis no.ST-18-06
Seismic retrofitting of low-rise reinforce concrete frame buildings with masonry infill walls in Nepal by mesh reinforcement
by Wagle, Sharad
|
AIT Thesis no.ST-18-07
Seismic retrofitting of a mid-rise RC beam column frame building with non-symmetric arrangement of RC shear walls in Nepal
by K.C., Laxman
|
AIT Thesis no.ST-18-08
Development of preplaced aggregate concrete for rigid pavements
by Gallege, Janith Hirosha
|
AIT Thesis no.ST-18-09
Mix proportioning for high strength pervious concrete using design of experiment
by Premaratne, Hasitha
|
AIT Thesis no.ST-18-11
Development of structural lightweing concrete by using normal weight aggregates
by May Myat Mon Kyaw
|
AIT Thesis no.ST-18-12
Mix proportioning of pervious concrete using design of experiment
by Thant Thaw Tar Win
|
AIT Thesis no.ST-18-13
Effect of common podium on seismic performance of two unequal-height towers
by Balasooriya, Balasooriya Mudiyanselage Pasindu Janith
|
AIT Thesis no.ST-18-14
Effect of common podium on the seismic performance of two equal high-rise towers
by Thinn Ei Khine
|
AIT Thesis no.ST-18-15
Progressive collapse potential analysis of a reinforced concrete frame mid-rise building due to a column failure
by Neupane, Rajesh
|
AIT Thesis no.ST-18-16
Effects of soil-structure interaction on seismic responses of tall buildings
by Uthayakumar, Abinayaa
|
AIT Thesis no.ST-18-17
Improved mix design method of self-compacting concrete using design of experiment
by Phenphitcha Suwannacheep
|
AIT Thesis no.ST-18-18
Measurement of wind-induced dynamic stresses in billboard structures
by Moh Moh Ko
|