1 AIT Asian Institute of Technology

Design of chimneys for air pollution control

AuthorNophadol In-na
Call NumberAIT Thesis no. WA-85-11
Subject(s)Smoke plumes
Air--Pollution
NoteA thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Engineering and Technology
PublisherAsian Institute of Technology
AbstractTo determine the degree of pollution or the ground level concentration of pollutants requires an atmospheric dispersion model for prediction and for developing reasonable standards of pollutants. The model of atmospheric dispersion is great assistance in design strategy to control air pollution too. The wind velocity in February during the northeast monsoon and in July during the southeast monsoon were selected to analyse for every minute interval. The wind velocity was collected by the Electricity Generating Authority of Thailand at Ao Phai. From the analysis of wind velocity, it was found that the wind velocity at Ao Phai is diurnal behavior. The diffusion coefficient at Ao Phai was determined from the wind velocity data using statistical approach. It was found that the diffusion coefficient at 300 feet high is higher than that at 150 feet high. The Gaussian plume dispersion model was then developed and used for prediction of concentration. Plume rise is calculated according to Briggs equation. Finally, the test runs of the model were made to predict the hourly average ground level concentrations around the stack or Power Plant.
Year1984
TypeThesis
SchoolSchool of Engineering and Technology (SET)
DepartmentOther Field of Studies (No Department)
Academic Program/FoSWater Resources Research Engineering (WA)
Chairperson(s)Suphat Vongvisessomjai
Examination Committee(s)Wang, Tsan-Wen ;Tawatchai Tingsanchali
Scholarship Donor(s)Canadian International Development Agency(CIDA)
DegreeThesis (M.Eng.) - Asian Institute of Technology, 1984


Usage Metrics
View Detail0
Read PDF0
Download PDF0